Reference: TUR112
Turbo screw with countersunk head for mounting 112 mm long windows. Screw diameter: 7.5 mm Screw length: 112 mm Pre-drilling diameter: 6 mmTightening bit type: TX30 (typ Torx)
Reference: TORX30
Screwdriver bit attachment TX30 star profile (Torx type)
Reference: TUR152
Turbo screw with countersunk head for mounting windows with a length of 152 mm. Screw diameter: 7.5 mm Screw length: 152 mm Pre-drilling diameter: 6 mmTightening bit type: TX30 (typ Torx)
Reference: MDK15
Set of 8 wooden mounting wedges Wooden wedges are indispensable helpers when installing windows and doors! Our wooden mounting wedges have the following dimensions: 15 cm x 2,5 cm x 2,5 cm - 0,1 cm. Thewooden mounting wedges are mainly used for aligning window and door frames in the opening in all axes. Thewooden wedges are also used for temporary fixing...
Mounting anchor for windows and doors
Mounting wall anchor for windows and doors is designed for fixing frames of plastic windows and doors. The window anchors have holes for fixing with dowels or turbo screws. Material - steel, hot-dip galvanized.
The dimensions of the anchors correspond exactly to the windows and doors we offer.
Suitable for combination with the turbo screw we offer!
This product can also be purchased in advantageous sets!
Use of the anchors when installing windows and doors
The usual positioning of the anchors around the perimeter of the window or door frame is shown in the drawing below. If it is not possible to provide anchoring at the specified distances (e.g. due to the fitting of roller shutters, lintels, etc.), it is necessary to ensure sufficient reinforcement of the relevant part of the frame.The same rules should be followed when joining windows and doors into assemblies. If possible, it is not recommended to drill through the window frame at the bottom, which serves to drain rainwater away from the structure. If this cannot be ensured, it is recommended that the head of the screw used be thoroughly sealed to prevent leakage into the profile. When anchoring, it is always necessary to take into account the suitability of the perimeter wall material, the depth of the drilling, the screw diameter, the distance from the wall edge, the free length of the screw (width of the connection joint = gap between the window frame and the wall).
Picture of window anchoring according to ČSN 746077:
A - anchor spacing: metal window max. 800mm | wooden window max. 800mm | plastic window max. 700mm
E - distance from the inner corner of the frame, mullion or partition: approx. 150 mm | approx. 250mm for PVC tinted windows
Reference: GRIP_SI
Universal aluminium handle for all types of balcony doors.
Reference: style_245x252
Choose the size of the window you need a blind for and, of course, the colour that suits your interior. These blinds are ONLY FOR OUR TYPE WINDOWS IN STOCK and cannot be used on any other window or door of the same dimensions. Customized blinds for other types and sizes of windows or doors can be ordered through our simple BLINDS CALCULATOR. ATTENTION:...
Reference: SP350
The adhesive combines the advantages of easy application of a one-component adhesive and instant bond strength, which is achieved by the very good internal cohesion of the adhesive.
Reference: 371x371
Window insect screen | anthracite (ideally in combination with interior shading technology) will prevent unwanted insects from entering your home, even if you leave the windows open! The window insect screens we supply belong to the group of window screens whose installation does not require any intervention in the window frame and can be easily mounted...
Reference: leifheit_51127
Leifheit Mini 3-in-1 Window Wiper.
Reference: TUR112
Turbo screw with countersunk head for mounting 112 mm long windows. Screw diameter: 7.5 mm Screw length: 112 mm Pre-drilling diameter: 6 mmTightening bit type: TX30 (typ Torx)
No customer reviews for the moment.
Wall mounting anchor for windows and doors
