Reference: TUR112
Turbo screw with countersunk head for mounting 112 mm long windows. Screw diameter: 7.5 mm Screw length: 112 mm Pre-drilling diameter: 6 mmTightening bit type: TX30 (typ Torx)
Reference: TORX30
Screwdriver bit attachment TX30 star profile (Torx type)
Reference: TUR152
Turbo screw with countersunk head for mounting windows with a length of 152 mm. Screw diameter: 7.5 mm Screw length: 152 mm Pre-drilling diameter: 6 mmTightening bit type: TX30 (typ Torx)
Reference: COWH30
Set of 10 white plastic caps with mandrel (for TX30 star profile (Torx type)) to cover the recessed head of turbo screws.
Set of 8 wooden mounting wedges
Wooden wedges are indispensable helpers when installing windows and doors!
Our wooden mounting wedges have the following dimensions: 15 cm x 2,5 cm x 2,5 cm - 0,1 cm.
Thewooden mounting wedges are mainly used for aligning window and door frames in the opening in all axes.
Thewooden wedges are also used for temporary fixing of the assembled window and door elements.
Thewooden wedges must not be left in the connecting joint after fastening and must be removed! If the wedges were left under the window, it would not be possible to install a vapour barrier or vapour permeable tape and often the sill could not be fitted.
On the other hand, the plastic pads remain under the window frame to prevent the window from unintentionally moving when the wedges are removed from the joint.
The wooden mounting wedges are used when fitting windows and metal structures.
Unlike plasticwedges, wooden wedges do not slip out of the joint and hold better in the joint.
Thewooden wedge soaks up water immediately after seating and thus speeds up and strengthens the fixation.
The wedges are made of spruce wood.
The wooden mounting wedges can also be used for other craft work.
Reference: TUR112
Turbo screw with countersunk head for mounting 112 mm long windows. Screw diameter: 7.5 mm Screw length: 112 mm Pre-drilling diameter: 6 mmTightening bit type: TX30 (typ Torx)
Reference: 57FRAL7043_GREY
Brand: SKYLIGHT
Trim for roof window or hatch 55 x 78 cm (550 x 780 mm), GREY for profiled roofing ATTENTION: A flashing must be ordered for each roof window and hatch!
Reference: SADA02-TRO
Installation and service kit for installation of 1 window or balcony door, which includes - anchors (6 pcs), turbo screws (6 pcs) and lock washers (3x 3 pcs), screwdriving bit TX30 star profile (Torx type) (1 pc), L-key TX15 star profile (Torx type) (1 pc), L-key IMBUS 4 (1 pc)
Reference: 611FRAL7043_GREY
Brand: SKYLIGHT
Trim for roof window 66 x 118 cm (660 x 1180 mm), GREY for profiled roofing ATTENTION: Each roof window must be accompanied by a flashing!
Reference: SWING_WH_TLAK
Brand: HOPPE
ROTO SWING design handle with button. Fixing screws included. Thelength of the shank is 37mm (can be used for all common plastic, aluminium and EURO windows and balcony doors).
Reference: NET150x220WEISS_ROLO
Insect protection for windows with rolled aluminium frame in professional quality. Easy assembly! Fiberglass mesh
No customer reviews for the moment.
Set of 8 wooden mounting wedges
Wooden wedges are indispensable helpers when installing windows and doors!
Our wooden mounting wedges have the following dimensions: 15 cm x 2,5 cm x 2,5 cm - 0,1 cm.
Thewooden mounting wedges are mainly used for aligning window and door frames in the opening in all axes.
Thewooden wedges are also used for temporary fixing of the assembled window and door elements.
